Post Jobs


The following is a description of the four basic types of time-delay relay contacts. Relays may be arranged for a fixed timing period, or may be field adjustable, or remotely set from a control panel. They are indicated for use in installations that do not have stable supply voltages. Latching Relay Refine Results. This action causes the material in the contacts to degrade, resulting in device failure. Australian Dictionary of Biography.

Uploader: Karr
Date Added: 12 July 2006
File Size: 58.73 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 23849
Price: Free* [*Free Regsitration Required]

United States Department of the Army The advantage is that one coil consumes power only for an instant while the relay is being switched, and the relay contacts retain this setting latching relay a power outage. Contact material may be optimized for low electrical resistance, high latching relay to withstand repeated operations, or high capacity to withstand the heat of an arc.

This typically happens by energizing a second coil. As with any switch, the contact current unrelated to the coil current must not exceed a given value to avoid damage.

High-voltage or high-current lathing can be controlled with small, low voltage wiring and pilots switches. Contacts are latching relay spaced to prevent flashovers and short circuits latching relay a lifetime that may exceed fifty years.

Reed relays can switch faster than larger relays and require very little power from the control circuit. They latching relay indicated for use in installations that do not have stable supply voltages.

A relay allows circuits to be switched by electrical equipment: Such relays are used latching relay switch low-voltage signals one volt or less where the mercury reduces the contact resistance and associated voltage drop, for low-current signals where surface contamination may make for a poor contact, or for high-speed applications where latching relay mercury eliminates contact bounce.


A dashpot is a piston filled with fluid that is allowed to escape slowly; both latching relay and oil-filled dashpots are used. For many years relays were the standard method of controlling industrial electronic systems. This type of relay remains in the last position it was in when the current was removed. Normally closed NC contacts disconnect the circuit when the relay is activated; the circuit is connected when the relay is inactive. Latching Relay Definition A relay is a type of electromechanical switch used in power supplies, counting systems and many other applications.

When the coil is energized with direct currenta diode is often placed across the coil to dissipate latching relay energy from the collapsing magnetic field at deactivation, which would otherwise generate a voltage spike dangerous to semiconductor circuit components. In many situations, the break arc is more energetic and thus more destructive, in particular with resistive-type loads.

DIN defines contact numbers in relays for automotive use. Latching relay closes the two internal relay switches connecting A to B, and C to D.

Latching Relay

On a dual coil device, when polarized voltage latching relay applied to the reset coil the contacts will transition. Latching Relays Latching Relay A latching relay is an electromechanical switch. The Relay does not operate even when voltage is applied. Latching relay scientist Joseph Henry is often claimed to have invented a relay in in order to improve his version of the electrical telegraph latchijg, developed earlier in Trigger mode – falling edge.

New Drivers  PM9MS DRIVERS

In a device with dual coils, when the polarized current is applied to a coil that is reset, latchig contacts will progress. A solid-state relay SSR is a solid state electronic component that provides a function similar to an electromechanical relay but does not have any moving components, increasing long-term reliability. It is claimed that English inventor Latching relay Davy “certainly invented the electric latching relay [6] in his electric telegraph c.

What is Latching Relay?

A mercury relay is a relay that uses mercury as the switching element. A static relay consists of electronic circuitry to emulate all those characteristics latching relay are achieved by moving parts in an electro-magnetic relay.

How Does a Latching Relay Work? Department of the Army technical manual.

Latching relay circuit schematic

A simple latching relay, which is now called a relay, was included in the original telegraph patent of Samuel Morse. By using this site, you agree to the Terms of Use and Privacy Policy. Typical Application Circuit VO output 1, then the load. Contact Life latching relay Unsuppressed vs.

This translates into significant make arcs.