To connect the machine to a network, set the following. If you select [PC-Fax], the fax transmission application starts, and the scanned document is sent to the application. Set a document in the ADF or on the document glass. Register a destination computer that is used for Scan To Computer in the machine. To scan using ActKey, preparation procedure such as installation of the scanner driver is required. Also, if information, such as the IP address of the machine or computer, is changed when performing a network scan, you can change the setting values with this tool.
|Date Added:||13 January 2018|
|File Size:||48.8 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
ActKey | MCdn | Colour Multifunction | OKI Data Australia
Also, if information, such as the IP address of the machine or computer, is changed when performing a network scan, you can change the setting values actkey scanner this tool.
Memo You cannot send an image to scanmer computers at the same time with this function. Press or several times, and press actkey scanner Setup].
Install the scanner driver and ActKey. Start Image Capture, and then select this machine from the list on the left side of Image Capture. Select the scanner driver name actkey scanner be added. Set the machine for using Scan To Computer.
The actkey scanner default administrator name and password are “admin” actkey scanner “aaaaaa” respectively. Your computer may automatically be registered when the scanner driver is installed. Actkey scanner [Device Settings] on the touch panel.
Note To connect the machine to a network, set the following. Select the scanner driver and select [Edit Scanner] from the [Scanner] menu. Send a fax with the fax transmission software on your computer.
Scanning from ActKey
The required software varies depending on the OS of your computer and the function actkey scanner use. If you use the network connection, perform the following steps.
Before Using Remote Scan.
Set the DNS server. Actkey scanner you select [Application1] or [Application2], the application specified by ActKey or Default program in Windows, actkey scanner associates with the file type starts, and the scanned document is displayed in the application. When the machine is actkey scanner in the computer, the computer is also registered to the machine as a destination computer for WSD Scan. Registering a Computer That is Connected Memo Your computer may automatically be registered when the scanner driver is installed.
actkey scanner If the computer information, such as avtkey name or IP address is changed, you need to newly register the information. Before Using Remote Scan You also need to set the machine in the stand-by mode for Remote Scan actkey scanner starting scanning on the computer.
Click a scan button. Press [Back] until the home screen is displayed.
Right-click [Show Network Configuration] in the task tray. How to Use Remote Scan. To perform Scan To Computer, you must register the computer name, IP address, and port number to the machine. Actkey scanner also need to set actkey scanner machine actkey scanner the stand-by mode for Remote Scan before starting scanning on the computer.
When you install ActKey, Network Configuration is also installed at the same time. Installing a Driver and Software to a Computer If you use the network connection, perform the following steps.
Scan | OKI Data
To actkey scanner using ActKey, preparation procedure such as installation of the scanner driver is required. Select a scanner driver to use, and then select [Add Scanner] from the [Scanner] menu. If you select [Folder], the scanned document is saved in the specified folder. Change the IP address and port number of the machine.
Deleting Computer Information Registered in actkey scanner Machine.