The hook breaks easily. Leave a Reply Cancel reply You must be logged in to post a comment. Execute the drum phase adjustment with SP twice. The bearing is properly applied with lubricant. Make sure that the harness [A] is hooked as shown. Lever lock [A] 3. Turn the drum positioning plate lever [B] and the image transfer unit lock lever [C] counter-clockwise.
|Date Added:||26 May 2018|
|File Size:||22.51 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Hopper cover [A] 4 hooks Release the three hooks first in the correct order Put the head of a screwdriver savin c3333 the groove gap [B] as shown, and then release the hook.
Savin – C Copiers and Printers Shipping Quote
The bearing is properly applied with lubricant. When you attach savin c3333 new drum unit to the development unit, remove a front c33333 and a front joint at first and use them savin c3333 reassembling the new drum unit and development unit.
Follow the correct order. Typically savin c3333 you begin x3333 across color blotches or color back grounding it can be a indicator that the charge grid and cleaning blade are starting savin c3333 go bad.
Remove it with a flat screwdriver.
If you change the development unit, do the ACC procedure. Turn the machine power on.
Execute the drum phase adjustment with SP twice. Savin c3333 not touch the OPC drum. Rotate the development roller [A] five or six times in the counterclockwise direction. Leave a Reply Cancel reply You must be logged savin c3333 to post a comment.
ACT! 6.03 Envelope Printing on Savin C3333 Redacts Address
Keep the developer off at both ends of the development unit enclosed in red lines in the savin c3333. Turn the machine power off. Drum unit [A] and Savin c3333 Unit [B] 8. Majority of print quality problems are related to parts of the drum unit. Various providers offer you PM kits to remake the drum units although with the price of these being fairly good value, I would personally lean in the direction of sqvin changing the complete unit simply because it normally requires low technical skill set not like rebuilding it which might get advanced and dirty.
Remove the front joint [A] The front joint [D] is firmly set. Lever lock [A] 3. Enter the Service Mode. Shake a bag of developer and pour it into the development hopper [A]. Turn the drum positioning plate lever [B] and the image transfer unit lock lever [C] counter-clockwise. Reattach the hopper cover hook szvin savin c3333. When reassembling the PCU: Open the drum savin c3333 plate [D]. You must be logged in to post a comment. Pull out the PCU hold savin c3333 grip while you pull it sain.
Do the ACC procedure. Open the front door. Do not let metal objects touch the development sleeve. Remove the bushing [A] of the development roller at the rear of the PCU 6.
When xavin development unit is removed from the drum unit, clean the entrance mylar [C] with a vacuum. Make sure savin c3333 the harness c33333 is hooked as shown. The steps below included directions for both replacement procedures.
The new drum unit has a front cover and a front joint. The hook breaks easily.