Insert the paper into the manual feed slot with both hands until the front edge of the paper touches the paper feed roller. Install a new drum unit. Miscellaneous Printer supports PJL. Gutenprint mailing list at SourceForge voluntary. In the process of this inspection, the LEDs and the control panel button are also checked.
|Date Added:||11 May 2011|
|File Size:||30.61 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The peak figure of power consumption is worked out excluding inrush current value. Avoid using coated paper, such as vinyl coated paper. The drum unit is nearly at the end brother hl-1240 laser printer its life.
This printer has 2MB memory, which cannot printet extended; this may not be enough for all jobs at dpi.
Brother HL Laser Printer Toner | Printer Cartridges at Inkjet Wholesale
We recommend you obtain a new drum unit to replace the current one. Never touch the surface of the heat roller.
The glue that is used might cause damage to the printer. Select the required manual duplex brother hl-1240 laser printer mode from the driver.
The printer will automatically print all the even numbered pages on one side of the paper first.
Brother HL Toner Cartridges
Fixing unit Main frame Main frame concavity Fixing unit Fig. Caution Be sure to select the serial interface type to match your computer as follows: Print speed may vary depending on interface type, emulation, processing power of the computer, memory allocated to the print job, brother hl-1240 laser printer size and graphic quality.
Actual print speed varies depending on the media type or paper size as shown in the tables below; Install a new drum unit. For more information about how to make the settings, see the Help text in the printer driver. This driver is obsolete.
Page – how to add extra memory for hl onl Caution Make sure that brother hl-1240 laser printer toner cartridge is installed correctly, or the toner cartridge may separate from the drum unit when you hold brother hl-1240 laser printer drum unit assembly. Page Follow these steps to replace the drum unit. The peak figure of power consumption is worked out when the halogen heater lamp is turned ON. If you cannot clear the error and see the same service call indication after turning on the printer, consult hp-1240 dealer nl-1240 our authorized service representative.
Brother HL-1240 Toner Cartridges
brother hl-1240 laser printer There’s a discussion around the special driver for this printer; apparently it’s got a bug of some sort. The page counter, drum counter and drum unit life bar are NOT printed on the Print Configuration page for some models.
Drum unit Are the drum shaft and drum Clean the shaft and electrode of the printer body the electrode. Development switching The developing bias is switched from V to V when timing 3, pages are printed.
Check if the brother hl-1240 laser printer cable is damaged or broken. Furthermore, installing the wrong Brother drivers can make these problems even worse.
In contrary to some of the user’s comments below, this printer works well with the “hl” driver, a driver based on “ljet4” but preceeding the job with Brother-specific PJL commands, especially the one to set the resolution as shown below. Unscrew the screws securing the access cover and remove it. Remove the drum unit from the printer. While the CPU is driven with a clock frequency of 33 MHz in the user logic block, it itself runs at 66 MHz, which is generated by multiplying the brother hl-1240 laser printer clock lh-1240 two.
To print on both brother hl-1240 laser printer of the paper from the manual feed slot Caution Before re-inserting the sheets, vrother have to straighten them, or you may get paper feed errors. The printing speed may change, depending on the paper size and broyher media type brother hl-1240 laser printer use, in order to avoid damage to the printer. Solvusoft is recognized by Microsoft as a leading Independent Software Vendor, achieving the highest level of paser and excellence in software development.
Printer status The power switch is off or the printer is in sleep mode. Cleaning the printer exterior Note Clean the printer exterior using the information in the following instructions.
Do not remove the ground wire connected to the base plate if it is not necessary to remove the low-voltage power supply unit.