Restore Default Click Restore Default Settings to delete all current settings and restore the router to its factory default settings. Click Next to continue. Route Click Route to display the information on the routing status. If you decide to change the automatically assigned default gateway IP address, then reboot the router for a new default gateway IP address. Don’t show me this message again. Click OK when a window appears querying Are you sure you want to restore factory default settings. A successful connection is established between the Solid router and PC through an Ethernet cable.
|Date Added:||15 March 2005|
|File Size:||67.13 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
To add a network traffic class rule: Ensure that the cables can be easily attached to the router without strain.
Asus AM602 User Manual
If you decide to change the automatically assigned default gateway IP address, then reboot the router for a new default gateway IP address. Click Update Software to update your software.
Comments to this Manuals Your Name. If you select Local, events will be recorded in the local memory. It shows the list of computers that have automatically obtained their IP addresses from the DHCP server, and the time when the IP addresses will expire.
Also enter the username and password assigned by the DDNS service. A confirmation dialog box appears asking you to verify the changes made. Flashing The router is trying to connect to your ISP. Confirm your new password. Click Next to continue. A damp cloth can be used to clean t he equipment. Select an appropriate location free from obstructions or any possible interference.
Page of 48 Go. A successful connection is established between the Solid router and PC through an Ethernet cable. Click OK to save your changes and then close the Control Panel. Click OK when a window appears querying Are you sure you want to restore factory default settings.
Assign a priority level low, medium, and high to this traffic class. Click Apply to save and activate the settings. If RIP is enabled, the router operation can be configured as active or passive. Qdsl have an account?
WL-AM Manual | Networking | ASUS New Zealand
Don’t show me this message again. Click Add to add a new connection for the WAN interface.
Do not change these settings unless directed by your ISP. USB cable connects to the PC. Enter the hostname and the interface that you are using. Asjs the IP address of the management station allowed to access the local management services. Check if the settings are right. The valid range is 0 to Select the WAN interface that you will be using.
Select the Enable NAT checkbox. The router reboots to activate the new settings.
Deselect the Enable Automatic Assigned Default Gateway checkbox If you do not want to use the automatically assigned default gateway.
Disable the bridge service if desired. A Digital Signature Not Found window appears.